The IC697PWR724 module is a power supply module that has been designed, manufactured, and distributed by GE Fanuc Automation. This power supply module provides operations at 24 Volts DC voltage and an output power of 90 Watts. The design of this module enables it to be plugged into the rack, specifically on its leftmost slot. This module is connected through a 48-pin backplane mounted connector on the rack. This power supply module provides different voltages to adjust to operations and logic level sequencing signals. The GE Fanuc Automation IC697PWR724 power supply module can operate with a single rack application and it can power 2 racks at a time. The total load must be within the specification ratings and the interconnection to this second rack is made through a cable.
The GE Fanuc Automation IC697PWR724 power supply module has a nominal voltage rating of 24 Volts DC and it can accept an input voltage range from 18 to 32 Volts DC. The module also comes with overvoltage and overcurrent protection. If the module is used in environments with temperatures higher than 60 degrees Celsius, it might need to be derated. The GE Fanuc Automation IC697PWR724 power supply module has an input power rating of 160 Watts and an input inrush energy rating of 22 Joules maximum. It also has a ride-through a time of 10 milliseconds at 20 Volts DC. The output voltage can be 5, 12, or -12 Volts DC with a specific current rating of 26, 4, or 2 Amps, respectively. This power supply module can be used with a VME integrated rack.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
