The IC697MDL651 module is a discrete input module made for industrial systems constructed from a variety of components that operate on high level. The module is produced by GE Fanuc and it is intended for use with programmable controller units from Series 90-70. The IC697MDL651 module has TTL compatible input points that are completely independent and that are equipped with filter option. The users can choose a filter with a value of 1 millisecond or 10 milliseconds, depending on the application requirements. In addition to that, the inputs have pullup resistors that do not require power and the module has LED status indicators. There are 32 inputs available per module and the cable that is used can have a maximum length of 30 meters (98.4 feet).
The IC697MDL651 module requires a voltage of 5 Volts DC and its voltage range is from -3 to 7 Volts DC. In addition to that, the input characteristics of the module include an impedance of 5.9 kiloohms with a deviation of plus or minus 5%, along with an on-state voltage range of -3 to 0.5 Volts. The off-state voltage is 2 to 7 Volts. The IC697MDL651 module has a typical on-state current of 1.7 milliAmps at the rated voltage and a maximum off-state current of 1.1 milliAmps. The module requires 0.53 Amps of current from 5 Volts bus voltage and it is designed according to VME standard (C.1). The configuration of the IC697MDL651 module can be achieved through software that runs on either the Windows or MS-DOS operating system. The configuration is done through the Ethernet TCP/IP or SNP port.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
