The IS220PVIBH1A model was designed as a Vibration Monitor Pack. The main function of the PVIB pack is to provide an electrical interfacing function between up to two I/O Ethernet networks and a vibration terminal board. The main components of this pack are the main processor board which is used with a majority of the MK VIe distributed I/O packs as well as a daughterboard and an acquisition board.
There are thirteen channels on this pack which are used for collecting and reading proximity and vibration information through several sensor types which are as follows:
- Velomitor
- Seismic
- Proximitors
- Accelerometers
The sensor types are used with different channels, for example, the accelerometers are only used with channels one, two, and three. Please note that channels nine, ten, eleven, and twelve can only be used in supporting proximitors while the thirteenth channel can input a proximity-type or Keyphasor signal type. Note that the thirteen differential inputs on the IS220PVIBH1A pack have a DAC (digital analog converter) which is used for bias adjustment which can void the DC content of the signal which will better center the A/D (analog-to-digital) input range.
The PVIB I/O pack has a processor application code that is used to potentially contain all of the logic codes necessary to allow the pack to operate from singular or dual Ethernet inputs. The network paths necessary to properly operate the IS220PVIBH1A pack are active at all times when being operated from two Ethernet inputs. If for any reason either network fails it will not result in any type of disturbance to the operation of the I/O pack but the failure will be indicated through the operating network connection.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
