GE

IS200BLIGH1A BIC LAN Interface Board

The IS200BLIGH1A functions as a LAN Interface-GENIUS board. This board makes up half of the Auxiliary Profibus-DP Interface Module (IS215PBIAH_A__.) This module is designed as an I/O block on a Profibus-DP network to provide integration between the drive and the controller. The other half of this module is a Universal Communications System Profibus-DP board (manufactured by SST Inc.) This module connects to the CABP Cable Assembly Backplane board within the board rack.

Xiamen Xiongba Electronic Commerce Co. LTD
FROM:Mr. Wei
E-Mail:2322181769@qq.com
TEL/WeChat:15396237607

Get A Quote
Contact Us

The IS200BLIGH1A is built with five board connectors. This includes the P8 backplane connector, the P1 and P2 connectors, which are not defined, and the P3 connector. The UCS board mounts on four standoffs and interfaces through the P3 connector, which is used to transfer all data, a digital address, and control signals between the two boards.

The IS200BLIGH1A has three LED indicators, including two located on its front panel. These two front panel indicators are “OK” and “DIAGNOSTIC.” The third LED indicates the power status of the P5 power supply.

The IS200BLIGH1A has one jumper (JP1) that should not be inserted by the user. It is worth noting that test points TP1 and TP2, as well as connectors J1 and J2, are designed for engineering test use only. More information on the IS200BLIGH1A board or the IS215PBIAH module can be found in GE publication GEI-100419.

VMIVME-7591 VMIVME-7698
VMIVME-7592 VMIVME-7740
VMIVME-7695 VMIVME-7750
VMIVME-7697 VMIVME-7751
VMIVME-7697A VMIVME-7765

VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216

PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.

We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.

As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!

Scroll to Top