F3423    Communication card module

F3423    Communication card module

HIMAF3423 is a communication card module. This product mainly supplies PLC module card parts, such as AB/ABB/GE/ Schneider/Bentley /TRICONEX Bachman/Westinghouse/Black horse Foxboro Honeywell and other brands. In addition, it can also provide selection configuration, electrical control cabinet design, engineering design, system sets, software programming and field commissioning services according to user needs.

HIMAF3423 is mainly used in the field of industrial automation and control systems. As a PLC module card, it can support a variety of brands of PLC systems, such as AB, ABB, GE, Schneider and so on. The product can provide selection configuration, electrical control cabinet design, engineering design, system sets, software programming and field debugging services according to user needs. These features enable HIMAF3423 to play an important role in industrial automation and control systems, helping to implement a variety of complex control logic and automation tasks.

The HIMA F3423 is an output module with the following parameters:
Load power: Each channel can be connected to resistive or inductive load, the load power is 500mA (12W), each channel can be directly connected to the signal light, the output power of 4W.
Integrated features: With integrated safety parking function and safety isolation.
Power requirements: 5VDC: 110mA / 24VDC: 180mA + load.
Output signal: 0 Signal The read-back signal of the operating point is less than or equal to 6.5V. In the case of a fault, when the read-back value exceeds this value, the next part will output a “0” signal, and no self-check is performed.
Crosstalk detection: Exchange detection signal and crosstalk (bit detection), output 500mA, with short circuit protection circuit.
Internal pressure drop: Internal pressure drop of 2V, in the case of driving 500mA load.
Current limiter response value: >550mA.
Allowable connection resistance: 110.
Low voltage trip: ≤16V.
Short-circuit current operating point: 0.75-1.5A.
Output leakage current: 350μA.
Output reset Output voltage: 1.5V.
Detection signal duration: 200μs.
Installation space: 4TE.
Operation data: 5VDC: 80mA / 24VDC: 50 mA.
Input voltage: 0-5.5V.
High input voltage: 7.5V.
Input current: 0-22mA, large input current 30mA.
Measured refresh: 50ms.
Safety time: 450ms.
Input impedance: 100kΩ.
Input filter time constant: about 10ms.
Basic error: 0.1% (25°C), operating error 0.3% (0-60°C), and safety-related error limit 1%.
Electrical strength: 200V to ground.

The following are other models of HIMA brand (welcome to inquire) :