DS200TCQFG1A TC2000 analog I/O expansion board

DS200TCQFG1A TC2000 analog I/O expansion board

The GE DS200TCQFG1A is a TC2000 analog I/O expansion board manufactured by General Electric as part of the Mark V family of gas turbine control systems.
The expansion board has seven jumpers and two 50-pin connectors, and also includes a 9-pin connector and a 34-pin connector. The board is equipped with six horizontally placed leds to indicate the working status of the circuit board. When the LED lights up, it means that the corresponding function is being powered on and running normally. In addition, the programmable logic device on the board is responsible for performing the processing functions required for the proper operation of the expansion board, while the erasable Programmable read-only memory (EPROM) module is used to store firmware and programming code.
The DS200TCQFG1A also supports a 3.3V / 5V PCI bus interface and provides 32 isolated digital input/output channels (16 digital input and 16 digital output) and 32 TTL digital input/output channels (16 digital input and 16 digital output). Each isolated digital output channel is equipped with Darlington transistors, providing isolation protection of 3750 Vrms. In addition, it also has a Card ID dial switch on the hardware, which is convenient for users to set the identifier of each board.
In practical applications, the DS200TCQFG1A may be used to monitor and control the operating status of gas turbines to ensure the stability and safety of the system. However, please note that specific application scenarios may vary according to actual needs and industry characteristics. The GE DS200TCQFG1A is mainly used in the Mark V series of gas turbine control systems.
As the TC2000 analog I/O expansion board, it plays a key role in the gas turbine control system. It can be used to monitor and control the operating state of the gas turbine, and realize the precise control of the gas turbine operation process by processing various analog signals. At the same time, the design and characteristics of the DS200TCQFG1A make it resistant to dust, oil, shock and vibration loads, and adapt to harsh industrial environments to ensure system stability and reliability.
Therefore, the GE DS200TCQFG1A is widely used in power plants, power transmission systems, and power distribution systems where precise control of gas turbine operation is required. However, please note that specific applications may vary depending on actual needs and industry characteristics.

The following are GE brand related products: