NKTK01-10

NKTK01-10

NKTK01-10 16-port function valve control module
NKTK01-10 is a 16-port function valve control module used in industrial control DCS system. It may be used in industrial automation and production process control applications, such as power, petroleum, mine lifting, ports, heating, gas, water supply, sewage treatment, metallurgy, paper, textile, chemical, water conservancy and other fields.
NKTK01-10 is a 16-port function valve control module used in industrial control DCS system. Its main functions are as follows:
Control the movement and operation of the valve: the module can accurately control the valve, including opening, closing, adjusting and other operations to meet the needs of industrial automation and production process control.
Signal conversion and transmission: The module can convert the signal from the control system into the control signal that the valve can recognize, so as to realize the precise control of the valve position and ensure the accurate and reliable operation of the valve.
Monitoring and feedback: The module is usually equipped with sensors that can monitor the real-time status of the valve, such as position, speed, etc., and feed this information back to the control system to achieve real-time monitoring and adjustment of the valve status.
Integration with other systems: The NKTK01-10 module can be integrated with other industrial automation systems and equipment to achieve collaborative work and data sharing, and improve the operating efficiency and stability of the entire system.
These functions make the NKTK01-10 module play a key role in industrial automation and production process control, and is widely used in power, petroleum, chemical, metallurgy and other industrial fields, helping to improve production efficiency, reduce energy consumption and reduce failure rates.

NKTK01-10 is a 16-port function valve control module used in industrial control DCS system. The following is some of its parameter information:
Network structure: The production process control network should be composed of process control layer, operation monitoring layer and data service layer. For DCS networks with more than 5000 I/O points or more than 10 operating stations, the process control layer and the operation monitoring layer should be divided into different subnets or virtual local area networks (vlans) according to operation or management. Network partitions should be able to form a system independently of other partitions without affecting the main functions.
Network features:
The communication network of the operation monitoring layer and data service layer shall comply with the communication standard of ISO/IEEE802.x.
The network bandwidth of the process control layer should not be less than 10Mbps.
The network bandwidth at the operation monitoring layer must be at least 100Mbps.
The network bandwidth of the data service layer should not be less than 1Gbps.