A06B-6077-H106 is a servo power converter manufactured by FANUC.
From the circuit theory, such as load resistance, the phase difference of current voltage is 0, such as inductive or capacitive load (computer) this current and voltage will form a certain Angle, so the bedroom is limited to the maximum power of pure resistance load.
When other capacitive compensation is used (that is, current converter, in fact, the name is very vague, does not mean that this product uses current conversion), it forces the use of high power resistive load when also formed a certain Angle, so that the detection equipment think that the use of capacitive load without breaking point (because of capacitive compensation), so that the reactive power will be increased.
The theoretical support comes from:
Active power P=UI. This is familiar, but it’s actually p equals UI
*cos&, when the load is resistive, ampersand =0, so the shorthand is P=UI. So reactive power is equal to UI
*sin&, this energy is wasted on the line without being used.
Xiamen Xiongba Electronic Commerce Co. LTD
FROM:Mr. Wei
E-Mail:2322181769@qq.com
TEL/WeChat:15396237607
Spot model:
A06B-6079-H106
A06B-6079-H208
A06B-6089-H104
A06B-6114-H106
A06B-6120-H075
A860-0302-T001
A20B-2002-0040/07DR
System characteristics:
1. Memory-type pitch error compensation can compensate the screw pitch error and other errors in the mechanical system, and the compensation data is stored in the CNC memory in the form of parameters.
2. CNC is equipped with PMC programming function
PMCS program control of machine tools and external equipment
3. Random storage module
MTB(Machine tool factory) can directly change the PMC program and macro actuator program on CNC. Since it uses flash memory chips, there is no need for a dedicated RAM writer or PMC’s debug RAM.
4. Display device
Typical composition:
1 CNC motherboard: used for core control, computing, storage, servo control and so on. The new motherboard integrates PLC functions.
2.PLC board: Used for peripheral action control. The PLC board of the new system has been integrated with the CNC motherboard.
3.I/O boards: Early I/O boards were used for CNC systems and external switching signals. The new type of I/O board mainly integrates the display interface, keyboard interface, handwheel interface, operation panel interface and RS232 interface.
4. MMC board: man-machine interface board. This is a PC computerised card, it does not have to be matched. With CRT, standard keyboard, floppy drive, mouse, memory card and serial, parallel interface.
5.CRT interface board: Used for display interface. In the new system, the CRT interface is integrated into the I/O board.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honwell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.