The Bently Nevada 1900/65A Universal Equipment Monitor is designed to continuously monitor and protect equipment used in a variety of applications and industries. The low cost of this monitor makes it the ideal solution for general purpose machines and processes that can benefit from continuous monitoring and protection. The 1900/65A offers four sensor inputs and four temperature inputs. Software can configure each sensor input to support 2 and 3-wire accelerometers, speed sensors or proximity sensors. Each temperature input supports E, J, K and T thermocouples, as well as two or three wire RTDs. The 1900/65A provides six relay outputs, four 4-20 mA recorder outputs and a dedicated buffer output. Users can use the 1900 configuration software to configure the relay contacts to open or close according to the normal, alarm and hazard status of any channel or combination of channels, and to provide data on any logger output for any variable on any channel. A dedicated buffer output can provide a signal for each sensor input.
The 1900/65A provides six relay outputs, four 4-20 mA logger outputs and a dedicated buffer output. Users can use the 1900 configuration software to configure the relay contacts to open or close according to the normal, alarm and hazard status of any channel or combination of channels, and to provide data on any logger output for any variable on any channel. A dedicated buffer output can provide a signal for each sensor input.
The Bentley 3500 system is used for vibration monitoring and protection of large machinery. The Bentley 3500 system must be equipped with the frame 3500/05, the power supply 3500/15, the frame interface module 3500/22M.
bently 3500 Bentley power supply high voltage AC 220V, spare parts as follows
127610-01 AC power supply module
125840-01 High voltage AC power input module (PIM)
125840-02 Low voltage AC power input module (PIM)
129486-01 High voltage DC power supply module
129478-01 High Voltage DC Power Input Module (PIM)
133292-01 Low Voltage DC Power Supply Module
133300-01 Low Voltage DC Power Input Module (PIM)
01720025 Spare fuses (two types of AC PIM and high voltage DC PIM)
01720045 Spare fuse (low voltage DC PIM)
129767-01 Power Supply Operation and Maintenance Manual
The Bentley power supplies bently 3500/15 are available in the following order information and model numbers
3500/15-AXX-BXX-CXX Description of options
A: Power supply type (upper slot)
01 Low voltage AC (85-132 Vac rms)
02 High voltage AC (175-264 Vac rms)
03 High voltage DC (88-140 Vdc)
04 Low voltage DC (20-30 Vdc)
05 Universal AC power supply (85-264 Vac rms) (new)
B: Power supply type (lower slot)
00 No power supply (only for use where a single power supply is required)
01 Low voltage AC (85-132 Vac rms)
02 High voltage AC (175-264 Vac rms)
03 High voltage DC (88-140 Vdc)
04 Low voltage DC (20-30 Vdc)
05 Universal AC power supply (85-264 Vac rms) (new)
C: Approved unit options
00 None
01 CSA/NRTL/C
02 ATEX/IECEx/CSA (Class 1, Zone 2)
CN China
The specific models are as follows
3500/15 (front panel 127610-01, rear back panel 125840-01)
3500/15-02-02-00, upper slot & lower slot both fitted, so dual power supply
3500/15-02-00-00, upper slots fitted, lower slots not fitted, so single power supply
3500/15-05-05-00, both upper and lower slots, so dual power supply
The following are the upgraded 3500/15 universal AC power modules:
3500/15 (front panel 106M1079-01, rear back panel 106M1081-01)
3500/15-05-05-00, both upper slots & lower slots fitted, so a dual power supply set
3500/15-05-00-00, upper slot fitted, lower slot not fitted, so single power supply set
Bently Nevada product structure diagram.
I. Monitoring System
1. Continuous online monitoring system
A.3500 Series
B.3300 Series
C.1900 Series
D.ADAPT Wind Wind turbine online monitoring
2. Patrol online monitoring system
A. Inspection and monitoring
B.Essential Insight.Mesh wireless solution
C.AnomAlert motor anomaly detection
II.Sensor
1.Eddy current sensor
2.Velocity acceleration sensor
3. Pressure sensors
4. Housing expansion and valve position sensors
5. Optical sensors
Portable diagnostic instruments
1. Portable diagnostic equipment ADRE system: ADRE 408 DSPi hardware
Peal. Portable data acquisition and analyser: SCOUT100/140
IV. Test and calibration equipment
Eddy current probe calibrator:TK-3 condition monitoring calibrator
Other test and calibration equipment: Testers for TIM testing using Snapshot
High accuracy micrometer
Rotor test benches
Velomitor power supply module keyed to signal multiplier/divider torsional vibration signal conditioner oscilloscope excuse module
| 3300/50-02-01-00-00 |
| 3500/93 |
| 330130-080-01-00 |
| 125800-01 |
| 330103-05-10-10-02-05 |
| 330104-00-04-10-02-05 |
| 330104-00-11-10-02-05 |
| 3500/15E |
| 3500/15 |
| 3500/61 |
| 3500/93 |
| 330130-040-00-00 |
| 3300/46 |
| 3500/45 |
| 330878-90-00 |
| 3500/42M 176449-02 |
| 330930-040-01-00 |
| 330104-00-13-10-02-05 |
| 330104-00-05-10-02-00 |
| 991-01-XX-01-01 |
| 3300/35 3300/35-13-01-01-00-02 |
| 3300/20 3300/20-13-03-01-00-00 |
| 3300/50 3300/50-01-01-00-00 |
| 3300/16 3300/16-15-01-03-00-00-00 |
If you need to inquire or purchase ,please send the product models to my email or call me directly .
Contact detail:Mobile/ WeChat/ WhatsApp:+86-15396237607
E-mail:2322181769@qq.com
QQ: 2322181769
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
