Bentley Nevada 330780-91-00 Vibration monitoring protection

330780-91-00
330780-91-00 AC Power Input Module
330780-91-00 Vibration monitoring protection

The vibration monitoring and protection instrument is a high performance dual channel vibration intelligent monitoring instrument, which can continuously monitor and measure the shaft shingle vibration (vibration) and shaft vibration (relative vibration) of all kinds of large rotating machinery. The instrument has an LCD display panel and can be equipped with an SD card as a data storage device.
The instrument is an intelligent instrument that can be used in conjunction with a vibration speed sensor or eddy current sensor to continuously monitor and measure the shaft shimmer vibration and shaft vibration of various types of large rotating machinery, and it is available in two types of mounting options: plate mounted and wall mounted.
Product functions:
1、Display function: there are three channels to display the online speed measurement value of the unit at the same time.
2、Alarm function: alarm and overspeed are indicated by LEDs respectively.
3、With power-on and power-off detection function, the alarm output circuit is cut off at the same time to effectively suppress the false alarm of the instrument.
4, each channel speed can be set to insure or cut out state, in the cut out state, the road speed signal does not participate in the voting output, note that in operation can not cut out two road speed signal at the same time. The device adopts modular structure, the number of channels can be freely combined.

5、With a high degree of intelligence, parameter setting to achieve full board operation.
6、Suitable for long-term online monitoring, easy and simple installation and commissioning, no need for on-site maintenance.
7, each module has 4 ~ 20mA current analog output, secondary alarm switch output.
8, the device uses high-performance switching power supply, each module built-in microprocessor, signal input and current output increased high and low pass filter and isolation grid, strong anti-interference ability, stable performance.
It is mainly used in power generation, steel, metallurgy, chemical industry and other fields to continuously monitor and measure the vibration of shaft tiles (vibration) of various types of rotating machinery, so as to facilitate the user’s analysis and maintenance of the machine working conditions. When the machine vibration exceeds the normal value, the device will immediately issue an alarm and danger signal, so that your machine can be protected in time to avoid unnecessary economic losses.
The vibration monitoring and protection instrument is highly intelligent, all functions are fully board operated, suitable for long-term online monitoring, easy and simple installation and commissioning, no on-site maintenance, alarm and danger output can be set at will via the keypad, measurement range, amplitude and intensity can be set at will via the keypad, real-time signal output.

The Bentley 3500 system is used for vibration monitoring and protection of large machinery. The Bentley 3500 system must be equipped with the frame 3500/05, the power supply 3500/15, the frame interface module 3500/22M.
bently 3500 Bentley power supply high voltage AC 220V, spare parts as follows
127610-01 AC power supply module
125840-01 High voltage AC power input module (PIM)
125840-02 Low voltage AC power input module (PIM)
129486-01 High voltage DC power supply module
129478-01 High Voltage DC Power Input Module (PIM)
133292-01 Low Voltage DC Power Supply Module
133300-01 Low Voltage DC Power Input Module (PIM)
01720025 Spare fuses (two types of AC PIM and high voltage DC PIM)
01720045 Spare fuse (low voltage DC PIM)
129767-01 Power Supply Operation and Maintenance Manual
The Bentley power supplies bently 3500/15 are available in the following order information and model numbers
3500/15-AXX-BXX-CXX Description of options
A: Power supply type (upper slot)
01 Low voltage AC (85-132 Vac rms)
02 High voltage AC (175-264 Vac rms)
03 High voltage DC (88-140 Vdc)
04 Low voltage DC (20-30 Vdc)
05 Universal AC power supply (85-264 Vac rms) (new)
B: Power supply type (lower slot)
00 No power supply (only for use where a single power supply is required)
01 Low voltage AC (85-132 Vac rms)
02 High voltage AC (175-264 Vac rms)
03 High voltage DC (88-140 Vdc)
04 Low voltage DC (20-30 Vdc)
05 Universal AC power supply (85-264 Vac rms) (new)
C: Approved unit options
00 None
01 CSA/NRTL/C
02 ATEX/IECEx/CSA (Class 1, Zone 2)
CN China
The specific models are as follows
3500/15 (front panel 127610-01, rear back panel 125840-01)
3500/15-02-02-00, upper slot & lower slot both fitted, so dual power supply
3500/15-02-00-00, upper slots fitted, lower slots not fitted, so single power supply
3500/15-05-05-00, both upper and lower slots, so dual power supply
The following are the upgraded 3500/15 universal AC power modules:
3500/15 (front panel 106M1079-01, rear back panel 106M1081-01)
3500/15-05-05-00, both upper slots & lower slots fitted, so a dual power supply set
3500/15-05-00-00, upper slot fitted, lower slot not fitted, so single power supply set

Bently Nevada product structure diagram.
I. Monitoring System
1. Continuous online monitoring system
A.3500 Series
B.3300 Series
C.1900 Series
D.ADAPT Wind Wind turbine online monitoring
2. Patrol online monitoring system
A. Inspection and monitoring
B.Essential Insight.Mesh wireless solution
C.AnomAlert motor anomaly detection
II.Sensor
1.Eddy current sensor
2.Velocity acceleration sensor
3. Pressure sensors
4. Housing expansion and valve position sensors
5. Optical sensors
Portable diagnostic instruments
1. Portable diagnostic equipment ADRE system: ADRE 408 DSPi hardware
Peal. Portable data acquisition and analyser: SCOUT100/140
IV. Test and calibration equipment
Eddy current probe calibrator:TK-3 condition monitoring calibrator
Other test and calibration equipment: Testers for TIM testing using Snapshot
High accuracy micrometer
Rotor test benches
Velomitor power supply module keyed to signal multiplier/divider torsional vibration signal conditioner oscilloscope excuse module

If you need to inquire or purchase ,please send the product models to my email or call me directly .
Contact detail:Mobile/ WeChat/ WhatsApp:+86-15396237607
E-mail:2322181769@qq.com
QQ: 2322181769

We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.