ABB | CP800 provides PN800 Plant Network Communications for HPC800
Technically speaking, the communication module is mainly used to realise the data transfer between the microcontroller and external devices, for example: the communication process requires the connection of an external data acquisition module or sensor, then this time the data transfer can be carried out through the interface between the external device and the communication module, so that the communication process is realised. So technically speaking, the principle of communication is such a concept. In terms of application, there are two types of communication: point-to-point serial communication and non-point-to-point serial communication. The more common communication methods on the market today are: GPRS, GSM, 3G and 4G. With the development of technology, future communication will move towards higher speed, higher reliability and more intelligent automation, so the development of 5G technology is the trend. But in the 5G era, there will be a revolutionary change in data. For example: the transmission rate will reach 10 Gbps or even 100 Gbps; there will be delays as well as jitter in the data transmission process; the data transmission, that is, the time delay and jitter cannot exceed 100 ms; the transmission distance will not exceed 10 km. In this series of circumstances it will be necessary to use communication modules to complete the communication function.
1、Highly reliable system design
Firstly, the communication module should be able to support multiple connection methods (e.g. point-to-point, wired and wireless). Secondly, it should have good anti-interference capability. Finally, it should be able to adapt to harsh environments. Therefore, the selection of communication modules must be tested in a targeted manner. For example, load tests, reliability tests, system failures, etc. are carried out on the system and the data is backed up and processed or updated in real time.
2. Well-established protocol stack
General communication modules are developed according to the protocols provided by the manufacturer, so that they cannot meet the evolving needs of the communication field. So a good communication module should be able to support more types of protocols, such as: Serial data transmission protocols: TCP/IP, UDP, etc. Wireless data transfer protocols: GSM, GPRS, 3G, etc.
3. Rich interface types
For example, the microcontroller can be connected to the serial port of external devices, and the communication module can also be connected to the serial port of external devices, and the communication module can also be connected to the I/O interface of external devices, which provides a lot of convenience for users. In addition, the diversity and compatibility of interface types should be taken into account. For example, the interface of a microcontroller can correspond to the interface type of the communication module, while it can also be used on other devices. This also means that the communication module can be either a universal microcontroller, programmable chip, etc.; a universal peripheral board; or a universal sensor, etc.
PPD512 A10-454000
PM891K01 3BSE053241R1
PM866AK02
PFTL201C 10KN 3BSE007913R10
5SHY4045L0004
5SHY4045L0006
PPD103-B03-10-150000
5SHY3545L0010/3BHB013088R0001
5SHX2645L0002
5SHX2645L0004
DSDP140B 57160001-ACX
KUC755AE106
3HAC029818-001/10 DSQC663
KUC755AE117
In March, everything is reviving and good things are brewing. May you double your happiness. May you have light in your eyes and love in your heart, all the way to spring blossom.
