Field Control Processor 280
EcoStruxure™ Foxboro DCS
Powerful, secure EcoStruxure™ Foxboro DCS field control processors (FCPs) boost operations and reliability.
Field Control Processor 280 dependably performs regulatory, logic, timing and sequential control, as well as data acquisition, alarm detection and notification. Their patented, fault-tolerant design offers the highest availability plus nonstop operation.
The FCP280 coexists with — and migrates from — the earliest generations of Foxboro automation platform hardware. The FCP280 provides twice the capacity and three times the performance of previous controllers — improving performance and cost-effectiveness in even the most demanding applications.
Product No. : FCP280 RH924YA
Product Type : Externally Sourced, Discrete Output Interface Module
Features : Sixteen discrete outputs, Supports discrete output signals at voltages of 15 to 60 V dc ,120 V ac/125 V dc , 240 V ac , Each input and output is galvanically isolated , group isolated when used with external excitation , Compact, rugged design suitable for enclosure in Class G3 (harsh) environments, Executes the Discrete I/O or Ladder Logic program, with the following configurable options Input Filter Time, Fail Safe Configuration, Fail , Safe Fall-Back, and Sustained or Momentary Outputs
Input Voltage Range (Redundant) : 24 V dc +5%, -10%
Consumption (Maximum) : 3 W (maximum) at 24 V dc
Heat Dissipation : 6.5 W (maximum) at 24 V dc (with all outputs at 1.5 A each)
Calibration Requirements : The module and termination assemblies require no calibration.
Temperature Module : -20 to +70°C (-4 to +158°F)
Termination Assembly PVC : -20 to +50°C (-4 to +122°F)
Relative Humidity : 5 to 95% (noncondensing)
Dimensions (L x W x H) : 10.4 cm x 4.5 cm x 11.4 cm
Weight : 0.284 kg
- Refining and petrochemicals
- Upstream and midstream oil and gas
- Chemicals and specialty chemicals
- Power generation
- Metals, mining and minerals
- Water and wastewater
- Food and beverage
- Life sciences and pharmaceuticals
1. Highly reliable system design
Firstly, the communication module should be able to support multiple connection methods (e.g. point-to-point, wired and wireless). Secondly, it should have a good resistance to interference. Finally, it should be able to adapt to harsh environments. Therefore, the selection of communication modules must be tested in a targeted manner. For example: load tests, reliability tests, system failures, etc. on the system, and backup processing or real-time update processing of data.
2、Perfect protocol stack
General communication modules are developed according to the protocols provided by the manufacturer, so that they cannot meet the evolving needs of the communication field. So a good communication module should be able to support more types of protocols, such as: serial data transmission protocols: TCP/IP, UDP, etc. Wireless data transmission protocols: GSM, GPRS, 3G, etc.
3、Rich interface types
For example: the microcontroller can be connected to the serial port of external devices, the communication module can also be connected to the serial port of external devices, and the communication module can also be connected to the I/O interface of external devices, which provides a lot of convenience for users. In addition, the diversity and compatibility of interface types should be taken into account. For example, the interface of a microcontroller can correspond to the interface type of the communication module, while it can also be used on other devices. This also means that the communication module can be both a general-purpose microcontroller, programmable chip, etc.; it can also be a general-purpose peripheral board; it can also be a general-purpose sensor, etc.
| Operator keyboard P0904AK P0903CW |
| Switches (24Access) P0973BJ P0973EY K0173ZU |
| Redundant power supply P0973BP |
| Redundant power supply P0973BN |
| Switches (16Access)P0973BK |
| P0973EY |
| K0173ZU |
| Redundant power supply P0973BN |
| Controllers (FCP)P0917YZ FCP270 P0926MX |
| Controllers (ZCP)P0926CP ZCP270 P0926DF P0926MX |
| Communication interface P0926GV FBM231 |
| P0926GU FBM230 |
| P0926GG FBM224 |
| P0926GH |
| FCS Fieldbus Cards |
| Redundant FF fieldbus cards P0922QS FBM228 |
4、Flexible usage
Because the communication module has so many functions, it needs to meet the needs of many different industries, for example: wireless communication, wireless data transmission, etc. In the process of use, the following issues must be considered: ● The connection mode of the communication module should be flexible, it can be two-wire, single-wire or even three-wire, ● The connection interface should be rich and diversified.
5、Support for secondary development
When the communication module requires secondary development, it is generally necessary to upgrade the firmware of the communication module, or add some new functions to the communication. If the module does not support secondary development, then it will not be possible to achieve these functions and application development. So a good communication module must have good support for secondary development capabilities.
FOXBORO FBM233 P0926GX
BENTLY 3500/15 127610-01
Vibro-meter 200-510-070-113 200-510-111-034 VM600 MPC4
ABB DSSR122 48990001-NK
GE IC693CPU374-GU
CTI 2500-RBC 901E-2500-RBC
MTL 8502-BI-DP
MTL 8715-CA-BI
Koenig & Bauer MOB4A2 FL/OPT(L0843702)
Alcatel-Lucent OS9-GNI-C20L
LAM 810-801237-021
LAM 810-046015-010
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honwell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
