The IC660ELB912 is a Genius network interface card. This module is specifically a daughterboard of an IBM PC Interface Module (PCIM). This card is installed to a single slot or double slot PCIM module, enabling I/O controller functionality to the host controller, allowing control, monitoring, and management of remote I/O devices over the Genius I/O network. This daughterboard along the PCIM card is formerly manufactured by GE Fanuc, now under Emerson Automation. The IC660ELB912 is responsible for implementing housekeeping tasks such as initialization and fault management of up to 30 Devices residing on the same Genius I/O network. It maintains up-to-date data images of the controlled device and is able to exchange data with other controllers over the same network by sending and receiving background messages unassociated with the I/O commands or global data. The host PCIM device provides a status LED indicator to determine the operation of the attached daughterboard specifically a GENI OK and COMMS OK. It supports a variety of configurable data rates such as 38.4K, 76.8K, 153.6K standard, or 153.6K extended. If two (2) daughterboards are attached to a dual-slot PCIM and each daughterboards are connected to separate Genius I/O busses, each of the daughterboard must be set to the same baud rate the cards are attached to. In addition, both daughterboards can be connected to the same bus therefore, each daughterboard must have the same baud rate configured. A single daughterboard requires 16Kbytes of host memory and 32Kbytes if Two (2) daughterboards are installed.
VMIVME-7591 VMIVME-7698
VMIVME-7592 VMIVME-7740
VMIVME-7695 VMIVME-7750
VMIVME-7697 VMIVME-7751
VMIVME-7697A VMIVME-7765
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
