The IC670GBI002 is a bus interface unit, which is part of the field control system. It acts as the header module for each field I/O system and manages the interface between the main PLC or computer via the Genius bus. It is capable of exchanging 128 bytes of input data and 128 bytes of output data and supports up to eight (8) field control I/O modules. The module supports a hot standby CPU configuration and requires an external 18-30 VDC supply voltage with a nominal value of 24 VDC.
The IC670GBI002 is a Bus Interface Unit (BUI) for the Field Control System family. The BUI supports the Genius bus protocol and supports the hosting of up to eight (8) field I/O modules.The BUI manages the data exchange between the field I/O modules and the host controller residing on the Genius bus.The IC670GBI002 Bus Interface Unit can accommodate up to 128 bytes of input data and 128 bytes of output data.
The IC670GBI002 is mounted on a suitable terminal base. It is designed to be mounted on a DIN rail with the DIN rail assembly connected to the earthing system. This ensures that the DIN rail material is made of good or excellent conductors and is not susceptible to oxidation and corrosion.
The IC670GBI002 is powered by an external supply voltage of 18-30 VDC with a nominal value of 24 VDC. it consumes 16.8 W and has an inrush current of 15-50 A (peak) with a maximum duration of 3 ms. it has a power output of 6.5 VDC, a maximum current of 1.4 amps and a hold time of 10 mS. the output voltage and current are transmitted via the BUI backplane to the hosting module.
The IC670GBI002 has a reliability of 183,000 hours mean time between failures (MTBF). It is equipped with terminal blocks for power and communication connections, as well as I/O terminals for establishing connections to the next terminal block. In addition to the redundant CPU components, it can also be used for hot removal and insertion requirements if the appropriate field I/O module version is installed.
The IC670GBI002 interface is a field control bus interface unit manufactured by GE Fanuc. The unit is available through the Field Control product range and is UL and CE compliant. In general, the unit is intended for use in non-hazardous locations and must be adequately protected if used in hazardous areas. The component also complies with FCC rules and operates at an ambient temperature of not less than 0 degrees C (32 degrees F) and not more than 55 degrees C (131 degrees F). IC670GBI002 Bus Interface Unit has a hold time of 20 ms (max), an inrush current of 20 amps (peak) for 3 ms (max), a power consumption rating of 48 volts amps for 115 volts AC and a power consumption rating of 24 watts for 125 volts AC with a rated power consumption of 24 watts, among other characteristics.
The Field Control IC670GBI002 bus interface unit is compatible with Genius handheld monitors of version 4.6 or higher, as well as a variety of host system devices. The unit also works perfectly with the 90-30 series, 90-70 series, 6 series or 5 series programmable logic controllers. The unit operates from 47 to 63 Hz and has an input voltage of 90 to 135 V AC or 105 to 150 V DC. The typical power required for the associated junction box is 16 mA. The IC670GBI002 bus interface unit is mounted on a standard DIN rail measuring at least 108 mm (4.25″) and its removal is simplified thanks to excellent design features. simplified. The bus interface unit accepts AWG #14 wire gauge and supports the use of communication buses where necessary.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
