The IC693MDL753 is a digital output module from the Series 90-30 Programmable Logic Controller (PLC) family. This module has Thirty-Two (32) positive logic output channels, generating 102 – 28.8 output voltage range with nominal voltages of 12 – 24 VDC. The IC693MDL753 is formerly manufactured by GE Fanuc Automation, now acquired by Emerson Automation. This module comes with output groupings specifically, Four (4) groups of Eight (8) outputs each. Each output group has 250 Volts isolation and 100 Volts between field side and logic side or optical isolation. The output current ratings of the IC693MDL753 are 0.5 Amperes per point with a maximum of 4 Amperes per group and a maximum of 3 Amperes per group common pin. It generates an inrush current of 5.4 Amperes for 10 ms while the On-state voltage drop of 0.3 VDC. The Off-state leakage current is 0.1 mA while the On and Off response time is typical for both signal transitions which is 0.5 ms. The internal power consumption of the IC693MDL753 is 260 mA source from the 5 VDC backplane. The IC693MDL753 is compatible with being used as a local I/O and distributed I/O module. It can be installed in any available slot of the chassis except the designated CPU, communication adapter, and specialty module slots. The IC693MDL753 occupies a single slot and can be installed as many as needed, limited by the I/O capacity and memory of the host controller. For wiring electrical loads to this discrete output module, recommended manufacturer cable assembly is IC693CBL315.
The IC693MDL753 I/O module is a 32-point digital I/O module. The IC693MDL753 I/O module has been developed by GE Fanuc for Series 90-30 of the GE programmable logic controllers or PLCs. The peak current consumption rating of the module is 260 milliamps when it is using 5 Volts DC voltage that is supplied from the PLC backplane. Each output point consumes 16 milliamps of current when it is in the ON state and the indicator LED for each output point consumes 4.7 milliamps of current. The 32 points are arranged into 4 groups of 8 outputs. When running on 24 Volts DC voltage, each group of points consumes 16.5 milliamps of current when all 8 outputs in the group are in the ON state. When running on 12 Volts DC voltage, each group consumes 9.6 milliamps of current when all 8 outputs in the group are in the ON-state.
The inrush current for the IC693MDL753 I/O module is 5.4 Amps. The on-response time and off-response time are both 0.5 milliseconds maximum. The maximum output current per point is 0.5 Amps and the maximum output current per group is 4 Amps. The output voltage range for the IC693MDL753 I/O module is 10.2 to 28.8 Volts DC. The outputs on the module are positive logic outputs. The outputs switch loads on the positive side of the power supply and they supply current to the load. Each group of output points can be used for a different load. Opto-couplers provide isolation between the logic side and the field side of the IC693MDL753 I/O module. When the PLC’s CPU stops, all the module outputs are forced into the OFF state. Connections to output circuits are made with the 2 male 24-pin connectors on the front of the module.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
