The IC697ALG320 is a Series 90-70 PLC analogue output module that provides 0-20 mA / 4-20 mA current output signals and -10 VDC / +10 VDC voltage output signals. The module was previously manufactured by General Electric Fanuc Automation and is now part of Emerson Automation. The module has four (4) analogue output channels with a resolution of 16 bits and monotonicity of 14 bits. All four channels of the module have a conversion rate of 2 ms.
The IC697ALG320 is an advanced analogue output module for Series 90-70 programmable logic controllers (PLCs), previously manufactured by GE Fanuc, rather than Emerson Automation. The module is designed to occupy a single slot on a 5-slot or 10-slot backplane and draws current from the backplane, drawing a maximum of 1.66 A (8.3 W) from the user supply at 5 VDC and 150 mA for current output. the IC697ALG320 is equipped with four (4) individually configured output channels that produce voltage and current outputs, specifically 0-20 mA / 4 20 mA current output signals and -10 VDC / +10 VDC voltage output signals. It has a built-in digital-to-analogue converter (DAC) circuit with 16-bit resolution and monotonicity, with 312.5 microvolts per LSB step for voltage and 0.5 microamperes per LSB step for 4 to 20 mA. The maximum sequential conversion rate for all analogue output channels is 2.0 ms. The module is factory calibrated and the calibration data is stored in the module’s EEPROM. It also has a continuous short circuit function which automatically returns the outputs to their normal state once the fault has been resolved. When configured for voltage operation, the analogue output load specifications include a minimum of 2000 ms for resistive loads and a maximum of 1000 picofarads for capacitive loads. For current operation, output load specifications are up to 700 ohms for resistive loads; 1.0 microfarads maximum for capacitive loads and 250 millihenries maximum for inductive loads. The accuracy of the module is influenced by a specific temperature coefficient of 25 PPM per degree Celsius for voltage and 50 ppm per degree Celsius for current.
The IC697ALG320 analogue output module is a 4-channel analogue output module manufactured by GE Fanuc. The module’s 4 outputs can be configured for voltage or current operation respectively. It provides bipolar or unipolar outputs with 16 bit resolution and 14 bit monotonicity. The output is updated at a rate of 2 milliseconds. Its maximum power consumption is 1.66 amps (8.3 watts) at +5 volts and the recommended operating voltage for this output module is 24 volts DC. some of the module’s features include fast update rates, individually configurable output channels and individual user adjustments, factory calibration and isolated output circuitry. the IC697ALG320 analogue output module also offers over- and under-range detection, open-circuit detection, diagnostic functions such as configuration error detection and module health detection.
The GE IC697ALG320 analogue output module is designed for use with GE Series 90-70 programmable logic controllers. The basic function of the module is to receive digital data from the control processing unit and perform a digital to analogue conversion in order to output an analogue signal. It ensures that the output is protected from overvoltage and transient conditions. It saves calibration data in its non-volatile EEPROM. Users can connect multiple IC697ALG320 output modules to archive up to 252 output channels. It is recommended to connect up to 7 modules in the CPU rack and up to 8 modules in the expansion rack.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
