The IC697BEM741 FIP Bus controller is a dual-channel bus controller for the GE Fanuc Series 90-70 FIP Bus controller system. This FIP Bus controller allows the GE IC697 PLCs to connect to the 1.0 Megabit FIP or the WorldFIP (EN50170) Fieldbus network. The IC697BEM741 FIP Bus controller can accommodate up to 128 field devices, including a field control I/O module (using the FIP Bus interface unit), FIP field bus network interfaced Series 90-70 and Series 90-30 PLCs, Series 90-30 I/O racks (using FIP remote I/O scanner modules), and generic devices such as bus-interfaced general-purpose computers (using the FIP interface module). The IC697BEM741 Bus controller can serially scan I/O devices on the FIP bus and I/O data is transferred to the CPU at every completed iterated scan. During a scan, the IC697BEM741 Bus controller independently searches for any connected remote device, broadcasts the output data from the PLC to connected devices, allows for the transmission of time-dependent messages from the field devices, and receives diagnostics messages from the connected field devices.
The GE Fanuc IC697BEM741 FIP Bus controller occupies a single slot in the GE IC697 PLC VME Integrator rack (the IC697CHS782 or the IC697CHS783 rack). The IC697BEM741 FIP Bus Controller can be configured with the Windows-based Logicmaster Series 90-70 programming software or the CIMPLICITY Control 90 programming software. The IC697BEM741 Bus controller comes with 6 LED indicators on the front panel. The top 2 LED lights (the “MODULE OK” and “RUN” LEDs) show the module’s operation status, while the bottom 4 LEDs indicate the communication status on the device. The IC697BEM741 Bus controller also has a pushbutton directly under the LED indicators for local resetting. It comes with a 15-pin serial connector that connects to a PC for upgrading operating firmware, and it also has 2 FIP Bus 9-pin connectors (Channels 1 and 2) for connecting to 2 FIP Busses.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
