The IC697CPX782 module is a CPU module that is designed for use with the GE Fanuc Series 90-70 programmable logic controllers. In addition to 1 MB of battery-backed memory, the module also includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in release 7.92 and later. The microprocessor on which the IC697CPX782 module is based is an 80486DX4 microprocessor with 96 megahertz of clocked speed. The I/O supported by the IC697CPX782 module include a maximum of 8000 analog I/O and 12,000 I/O in any mix. The rated time taken to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports in-system firmware upgrades. The configuration of the module is performed through software running on computers which interface with the module over Ethernet or serial connections.
Connecting a programmer to the IC697CPX782 module via Ethernet requires the installation of an Ethernet interface module in the PLC. Connecting a programmer to the IC697CPX782 module via a serial port can be done through the 3 on-board serial ports. The protocols supports by the 3 ports are as follows: Port 1 supports RS-232 communication, and both Port 2 and Port 3 support RS-485 communication. Three of the 5 LED indicators on the module’s front panel provide the status of the serial port activity. A serial cable is required for interfacing with Port 1, and a converter is also required for Ports 2 and 3. The shelf life of the module battery is 5 years at 20 degrees Celsius. The IC697CPX782 module requires 3.1 Amps of nominal current from the 5 Volts bus. The recommended operating temperature range is from 0 to 60 degrees Celsius.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
