The GE Fanuc IC697MDL251 Module is an input module manufactured by GE Fanuc as part of the Series 90-70 product line. The IC697MDL251 Input Module comes with 16 input points that are laid out in 4 individual groups, each with 4 points. Each of these groups is compatible with and can be used with a different AC voltage supply phase because each group is isolated. The IC697MDL251 Module is mechanically tuned to provide an easy suitable replacement with a similar type of module in the field. This 16-point input module is well-matched with a variety of input devices, including limit and selector switches, pushbuttons, and electronic 2-wire and 3-wire proximity switches. A current of 0.35 Amps is required through the 5 Volts bus found on the device’s backplane.
The GE Fanuc IC697MDL251 Input Module has a mechanical key that is dedicated to preventing any accidental or unauthorized switching of the modules in a specific slot. When the users want to change the location of the module after the key latching process, the module allows for the key to be removed when it is pushed upwards and therefore unhooks as it comes off the rail. After the installation location has been determined, the module and the key can then be reinserted. The IC697MDL251 Module’s wiring requires a connection from the source of power to the input terminal for all 4 input groups. Wire Size 14 to Wire Size 22 can be used for the removable field-wiring terminal board. The wires’ bundle is protected on the terminal board through the cable tie, which runs through the cleat found at the lower corner of the board. The main power source must be turned off when removing the board.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
