The IC697MDL341 Output Module is a discrete output module is a product of GE Fanuc, and it belongs to GE Series 90-70. It operates on a voltage rating of 120 to 240 Volts AC and it has 12 isolated points that ensure that different phases are used on the AC power supply. The module features 2 Amps of current capacity for each output point as well as a high inrush capacity of 10 times the rated current therefore allowing for a notable range of incandescent and inductive loads. Each of the outputs is fused with a replaceable fuse rated at 3.15 Amps. The GE Fanuc IC697MDL341 Output Module has LED indicators that show the on and off status for every output point on the circuit’s logic side. Additionally, this module has an LED indicator for displaying the status of the different fuses on the module. When any of the fuses blow, the LED indicator will turn on to show it.
The IC697MDL341 Output Module is keyed automatically to ensure the correct replacement by using the same type of module on the ground. The operators can configure the input and output references without using the DIP switches and jumpers. The GE Fanuc IC697MDL341 Output Module is compatible with and works with a wide range of load devices such as indicators, solenoids, and motor starters. Each point has a current rating of 2 Amps that applies to current long-term aptitude for every point. The overall dissipation of heat within this module limits the total current to 16 Amps. The output can rapidly execute surge current by exceeding the continuing current rating. Surges are repeated depending on the current rating of this module and on the percentage of time when the device is powered on or in the duty cycle.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
