The IC697PWR710 power supply module is a 120 to 240 Volts AC or 125 Volts DC rated power supply module made by GE Fanuc. The IC697PWR710 power supply module is part of the Series 90-70 platform that is manufactured by GE Fanu. It comes with active power factor correction circuits for maintaining a cohesive power factor that eliminates the need for oversized circuit breakers and wiring. The IC697PWR710 comes with an overvoltage protection feature. The electronic overvoltage protection circuit clamps the output in case of the 5 Volts bus voltage rising and exceeding 6.2 Volts. This prevents an external overvoltage on the output from causing the power supply fuse to open. The IC697PWR710 power supply module is set so that if an internal fault in the power supply happens as a result of an overvoltage condition, the fuse does not open.
The IC697PWR710 power supply module also comes with over-current protection in the form of an electronic over-current limit of 12 Amps. If the maximum current rating is exceeded, the output voltage will drop. Ideally, the IC697PWR710 power supply module will remain safe until the high load is removed or reduced so that the current overload does not result in the opening of the fuse. The IC697PWR710 power supply module features dual rack protection through 2 racks that function under different conditions. For instance, only 5 Volts of power is required in the second rack, and the total power required for both racks falls within the capability of the power supply. The IC697PWR710 power supply module is a plug-in module that can be installed in the leftmost slot of any standard IC697 rack or in the VME integrator rack. The power supply door can be easily opened by simply grasping the left corner of the door firmly.
The IC697PWR710 operates when connected to an external AC or DC power source specifically, 90-264 VAC at frequency of 47-63 Hz or 100-150 VDC. The module’s input power is maximum of 90 Watts at full load, input half cycle peak inrush of 3 Amperes, typical and power factor of greater that .95. It deliver a maximum output power of 56 Watts and nominal output voltage of 5.1 VDC with an output voltage range of4.90-5.25 VDC.
The IC697PWR710 has an integral overvoltage and overcurrent limits, specifically, 6.2 Volts, typical which is provided by the internal electronic voltage protection and 12 Amperes, typical via the integral electronic current limit. This power supply is also features a ride through time of 21 ms from loss of AC input and designed in compatibility with VME standard C.1.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
