The IC697PWR711 is a power supply module from the Ge Fanuc 90-30 Series Programmable Logic Controller (PLC) family. This module has a selectable input voltage compatibility such as 120 VAC and 240 VAC, dictated by an external jumper setting. For both the nominal vali input voltages, the applicable voltage range are 90 to132 VAC or 180 to 264 VAC, with frequency of 47 to 63 Hz.
The IC697PWR711 has output voltage supply of +5VDC, 12VDC and -12VDC and logic level sequencing signals towards the backplane. This power supply is mounted on the leftmost location of the 90-30 rack, attached via the 48-pin backplane connector. This power supply is capable of supplying power to a second rack provided that the total load of the additional rack will not exceed the total 100 Watt capacity of the IC697PWR711. Specifically, the 2nd rack must be less than 5.2 amperes. Additionally, powering the 2nd rack requires use of 3-feet connecting cable. The 2nd rack must be within the reach of this cable as it is not designed to operated more than 3 ft.
The GE Fanuc Automation IC697PWR711 power supply module includes electronic short circuit protection and a power factor correction when it is operating with AC voltage. If the GE Fanuc Automation IC697PWR711 power supply module is meant to have continuous operations in environments with high temperatures and low line voltages, its specifications must be derated to guarantee safe operations. Normal operations are only possible with temperatures below 60 degrees Celsius. The GE Fanuc Automation IC697PWR711 power supply module is installed in the left slot of a GE IC697 rack or any VME integrator rack and it is a plug-in module type. This module comes with an input half-cycle peak inrush current of 3 Amps.
VMIVME-7750
IS220PVIBH1A
IS420UCSCH2A
5SHY3545L0010 3BHB013088R0001
3BHE009681R0101 GVC750BE101
ICS TRIPLEX T8310
ICS TRIPLEX T8461
ICS TRIPLEX T8151B
ICS TRIPLEX T8403C
ICS TRIPLEX T8311
ICS TRIPLEX T9402
ICS TRIPLEX T9451
IS215VCMIH2BB
IS215VCMIH2CA
ABB PM866K01 3BSE050198R1
ABB 216NG63
ABB 216VC62a
ABB 216EA61b
ABB 216AB61
ABB 216DB61
ABB REG216
PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.
We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honeywell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.
As long as tomorrow is still here, as long as spring is still here!
As long as there is life, as long as there is hope!
As long as tomorrow is still here, as long as the future is still here!
