IS220PSVOH1B IS220 series modules

IS220PSVOH1B IS220 series modules.GE has spent over thirty years researching and developing the Speedtronic system to create a reliable, scalable and complete solution for the management of heavy-duty steam and gas turbine systems.

GE has an extensive portfolio of gas turbines based on 80 years of gas turbine technology, and has achieved several industry firsts and two world records for the GE HA-class gas turbine. At the same time, GE also offers an industry-experienced range of gas turbines for hydrogen and low-calorific fuel operations, of which more than 75 have accumulated more than 6 million operating hours over decades of use. Working closely with GE’s Global R&D Centre, GE will continue to invest in hydrogen and carbon capture technologies to further drive natural gas-fired power generation towards a low or near-zero carbon footprin

1. Single-sided
In the most basic PCB, the parts are concentrated on one side and the wires are concentrated on the other side. Because the wires only appear in one side, so this PCB is called single-sided (Single-sided). Because single-sided has many strict restrictions on the design of the circuit (because there is only one side, the wiring cannot cross over and must be routed around a separate path), so only the early circuits used this type of board.
2. Double-sided boards
This type of board has wiring on both sides, but in order to use the wires on both sides, there must be a proper circuit connection between the two sides. The “bridge” between such circuits is called a via. A via is a small hole in the PCB, filled or coated with metal, which can be connected to the wires on both sides.

3, multilayer boards
In order to increase the area that can be wired, multilayer boards use more single or double-sided wiring board.
With a double-sided as the inner layer, two single-sided as the outer layer or two double-sided as the inner layer, two single-sided as the outer layer of the printed circuit board, through the positioning system and insulation bonding material alternately together and conductive graphics according to the design requirements of the interconnection of the printed circuit board will become a four-layer, six-layer printed circuit board, also known as multilayer printed circuit board.

Xiamen Xiongba Electronic Commerce Co. LTD

FROM：Mr. Wei

E-Mail：2322181769@qq.com

TEL/WeChat:15396237607

We do other brands: ABB, Allen-Bradley, Schneider, GE (General electric), Westinghouse, FANUC, Bently, KUKA, Foxboro, Triconex, Honwell, YASKAWA, etc., if you need, you can contact me, look forward to your consultation.